In the last section, we explained different materials of nail drill bits: Mandrel/Sanding band, Carbide bits, Ceramic bits, and Diamond bits. And now we are going to talk about the shape of nail drill bits. There are so many shapes of bits we can't learn every of it. So we are going to explain to you guys the most used.
Barrel/Cylinder bit
The barrel bits are great for doing surface work on the nail. You can also use the barrel bits for backfill cutting, shortening, and shaping the nail, and to make a smile line. But make sure you don’t use this bit in the cuticle area.
UNC/Needle Bit
The UNC bit is under the nail cleaning bit. The shape of the UNC bit is pointed and small. The point size changes from manufacturer to manufacturer. This particular shape helps the bit to get in tight spaces. The UNC bit is commonly used not only for under the nail cleaning but also for sidewalls. Some nail technicians also use this bit for making designer holes in the nails.
Ball Top Shape
The ball-shaped bit is used for hard skin & cleaning up the Eponychium (the hard skin above the nail plate) or removing loose cuticle been lifted from the nail plate.
Cone Bit
The cone bit has a long, slim, and tapered shape. You can use this cone-shaped bit for several purposes, such as preparing the cuticle area and sidewalls and cleaning under the nail. You also can use the cone bit on the top of the nail. It is a great shape for toenail surface work, but not the best shape for fingernails surface work.
Safety Bits
These are actually cuticle safety bits and are designed for safe cuticle work. They are rounded at the top and come in a great variety of shapes. With these bits, you can easily reach the cuticle and sidewalls without damaging the nail. They are great for in-fill cuticle work.
Mandrel Bit
This bit is commonly made of rubber or metal. You can work with the mandrel bit only after slipping it into the sanding band. The sanding band is made of paper and needs to be replaced after you work on a client. Sanding bands tend to heat very quickly. Heat can cause your client
Flame Bit
The Flame bit is great for removing hangnails. Used to create a lip of dead cuticle in order to better remove dead skin. Removes any excess dust and skin around the nail plate and can also be used to clean and perfect after product application.
❤Check All MelodySusie's bits❤
You may be interested in those articles as well:
The Full Guide To Nail Drill Bits | Material Explained
How To Do The Perfect Manicure At Home
26 comments
Brittany
I can’t wait to try out some of the tips and tricks for using nail drill bits that I learned from this guide. Thank you for the helpful information.
Chayna
I found this guide to be very informative and well-written. I can’t wait to try out some of the tips and tricks for using nail drill bits.
Reyvon
I found this guide to be very informative and well-researched. The information on nail drill bits will be extremely helpful to both beginners and professionals alike.
Karen
I’ve been a nail artist for years, but this guide taught me a thing or two about the different shapes of nail drill bits. Great job!
Berenise
I appreciate the step-by-step instructions in this guide, they make it easy to understand and use the different shapes of nail drill bits.
Leave a comment
All comments are moderated before being published.
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.